top of page

 

Honda ATC200S ATC185S Custom 4x6 Inch LED Headlight 12 Volt 45 Watt

 

Fits 1983-86

 

Honda ATC200S ATC185S Custom 4x6 Inch LED Headlight 12 Volt 45 Watt Fits 1983-86

Message for photos showing installation on steering stem

Instrustions-

Quick Steps
- Install Mounts First, on Outer Steering Stem Tubes Under Headlight Frame Grommets, do not tighten straps yet.
- Install Top Spacer Struts with Headlight into Headlight Frame Grommets
- Install Headlight Mounts Over Headlight Pivot Pins 
- Tighten Mount Straps and Latch

 

Wiring is plug and play with custom harness that taps into the stock headlight switch plugs.   Message with questions about wiring installation.  Its all plug and play no splicing required, uses appropriate stock wire colors, where needed.  This Harness was built using the OEM Honda Wiring Diagram the diagram shows each connector you will be tapping into ( with male and female pin markings ) its highly suggested that you download pdf manual and look and the wiring diagram and ask questions before or during installation.  

 Mounting the rectifier is up to the buyer, message if you want an extension harness to mount the rectifier else where. It can be bolted to the back of the headlight case and reach the wire connectors.  Message if you dont have the stock headlight plugs to use this harness correctly.  We can make you a different harness.

A Trike just isnt a Trike without a headlight. Ive Been Riding Honda ATCs for 35 years,  Headlights are always an issue, Ive always wanted to design my own be able to have one the shelf when you need it, when your old incandesent bulb blows for the 300th time.  This is a simple basic design that holds a standard widly available led lamp that many folks like adapt to various trike models.  Uses Standard H4 socket

We can customize the mounts to fit many trikes, dirtbikes or motorcycles.  

Watch for other new headlight listings we will be offering kits for other models

LED Specs-
    
15 x 3 W LEDS 

5600 Lm/pcs for High beam
3500 Lm/pcs for Low beam

LED Power:45W
Color temperature: 6500K
Working voltage: DC 10V to 30V
Waterproof rate: IP68
Beam pattern: High beam/Low beam
Lifespan:50,000 hours
Easy installation:With H4 plug

New LED Headlight Assembly. 3D Printed Case and Mounts, No Tools Required to Mount.  Simple Headlight System    

Color - 3D Printer Filement used to produce the case is RED , Its not a perfect match to original honda colors.  We can Change the Case , or Mount colors upon request 

We can customize the mounts and headlight case message with ideas or requests.  We Can supply mounts for other models.  Message with Width Between Forks, Fork Tube Diameter, Spacing required between upper and lower mounts and Distance Back of Headlight should be from the front leading edge of the fork tubes.  

ATC185S ATC200S Require Rectifier for running LED lights.,, see our other listing for just harness and rectifier if you want to run led bulbs in your OEM Headlight.

 

Honda ATC200S ATC185S Custom 4x6 Inch LED Headlight 12 Volt 45 Watt Fits 1983-86

SKU: 185-200ccHL
$74.99Price
Excluding GST/HST |
Quantity
    bottom of page